100 Vinyl Repair Adhesive, 16 Oz
CA$33.81
In stock
SKU
ACC-116
100 vinyl adhesive 16 oz can only be used with the applicator cap on clean surfaces. Cut a round circular patch for best results. For inflatables and light gauge vinyl, apply adhesive to patch sparingly and press tightly to the surface to be repaired. Allow your repair to dry for 24 hours.
A face mask or underwater goggles should always be used when going underwater to make repairs. For deep underwater repairs, cut round corners on the patch. Apply the patch and fold the patch over upon itself. When you reach the damaged area under water, unfold the patch and apply immediately to the liner, squeezing out all water bubbles.
Regular Use Instructions:
- All surfaces must be clean
- Cut round corners on patch
- For inflatables and light gauge vinyl, apply adhesive to patch sparingly and press patch tightly to surface to be repaired
- Allow drying for 24 hours
For Underwater Repairs:
- Cut round corners on patch
- Apply adhesive to patch and fold patch over upon itself
- When you reach the damaged area under water unfold the patch and apply immediately to the liner, squeezing out all water bubbles
- Do not disturb patch for at least 48 hours
- Allow 4-7 days for full cure
| Enable Product | Enabled |
|---|---|
| Visibility | Catalog, Search |
| Related Parts Id | 0 |
| Colour | MONT BLANC |
| Tax Group Code | HST |
| Unit of Measure | EACH |
| Base UOM ID | 352490 |
Write Your Own Review
Related Products
Check items to add to the cart or
